The Reason for the Loud Sound of Circular Saws: An Explanation of the Universal Motor

24

If you have ever stood next to someone using a circular saw, you know that it is not just noisy. It is very aggressive. This particular high-pitched screaming sound is not accidental. It is a direct result of the universal motor hidden inside the tool.

These motors are commonly found in handheld power tools. Vacuum cleaners, routers, drills – they all use them. Why do they scream? Brushes. Inside the motor, carbon brushes continuously rub against the grooved rotor and transmit power. In a circular saw, the gear train that takes power to the blade also adds another layer of noise.

Table saws or radial arm saws with an induction motor are quieter. They do not use brushes. They operate solely on AC power and typically use belt drive instead of a gearbox. But the reason manufacturers choose a universal motor for handheld tools is simple: weight.

The 3/4 horsepower induction motor is about 6 inches long, 6 inches in diameter, and weighs about 19 pounds. The equivalent universal motor is the same length, but only 3 inches in diameter. This is a quarter of the volume. The weight is reduced by more than 85%. A circular saw with an induction motor would be too heavy for safe use.

Use hearing protection. Always. Even if the tool is quiet, a loud noise is sometimes produced when cutting wood.

The Physics of Power and Noise

The term “universal” comes from the motor’s ability to run on both AC and DC. This flexibility makes it ideal for portable devices. But this flexibility comes at a price. Physical contact between brush and armature causes friction and sparking. This causes a characteristic buzzing and whistling sound.

Induction motors are dependent on electromagnetic fields. There is less noise because there is no physical contact. It also operates at a lower speed, typically spinning between 1075 and 3450 RPM on 3/4 horsepower units. Universal motors spin faster, typically around 15,000 rpm. The higher the rotation speed, the louder the noise. There is a compromise between speed, lightness and silence.

If your device is quiet, it probably has a induction motor. Ceiling fans and refrigerator compressors are common examples. No need to hold it in your hand. It doesn’t have to spin 15,000 rpm. All that is needed is to move the air or compress the refrigerant efficiently.

Choosing the Right Motor for the Job

When making a decision about using a circular saw’s universal motor, isn’t about preference. It’s all about physics and ergonomics. A homeowner who wants to use a 19-pound motor on a handheld frame is going to struggle. The balance of the tool is lost. Fatigue sets in quickly. Safety would decrease.

The universal motor solves this. It offers high power in a small package. Because it rotates quickly, it can cut wood efficiently. In addition, its weight is only a fraction of the weight of an induction motor.

But there is still noise. Brush friction. Gear grinding. Sound waves travel to the ears.

Therefore, hearing protection is not an option. It’s necessary. The noise caused by the circular saw can quickly exceed the safety level. Even if the exposure is short, it can cause damage over time.

Safety First

When using power tools, safety is about more than just guards and blades. It has to do with your body. Your ears are fragile. The lungs are sensitive to dust. Eyes are easily damaged by debris.

Use hearing protection. Use a dust mask. Wear safety glasses. These are not suggestions. They are requirements.

The tools at your disposal are very powerful. Respect it.

“We recommend that you wear hearing protection whenever you use noisy power tools.”

This

Previous articleHow to repair glass ceramic stove scratches with household items
Next article5 Unexpected Ways Hydrogen Peroxide Cleans Your Home Better Than Bleach